Melanie and I are upgrading our photography equipment, so we have a lot of spare parts up for sale. We're letting everything go at 1/2 the current U.S. retail price (checked against B&H pricing). Send me an e-mail if you're interested in one or more of these pieces. All prices are in USD.

For Sale

2x Ikelite #9581.09 9"Quick Release Handle with Ball - $22 ea
4x Ikelite #9577.3 Handle Mount - $11 ea
2x Ikelite #9580.04 Ball Arm Extension - $14 ea
2x Ikelite #9580.06 Ball Arm Extension - $16 ea
5x Ikelite #9577.2 Ball Clamp - $19 ea
1x Ikelite #9577.1 Ikelite Tray or Handle Mount - $10 ea
2x Ikelite #9577.41 Substrobe 50, DS50, DS125 Mount - $14 ea
2x Ikelite #9577.33 Extended Handle Mount - $14 ea
1x Ikelite #9575.2 Tube Mount - $10 ea
1x Ikelite #4075.1 Strobe Arm II Mounting Block - $35 ea
1x Ikelite #4100.5 TTL Digital Slave Sensor - $48 ea
1x Ikelite #4100.6 Manual Controller - $64 ea
1x Ikelite #4103.1 TTL Substrobe Cable - $50 ea
1x Ikelite #4103.2 "Y" TTL Substrobe Cable - $75 ea
2x Ikelite #1100 Mini-C Black - $12 ea
1x Ikelite #4074.1 Mini-C Lite Mount - $14 ea
1x Ikelite #4073 Mini-C Lite Bracket - $2.50

1x Sea & Sea Motor Marine 20mm Wide Angle Conversion Lens - $189 ea
1x Sea & Sea Motor Marine 3T Macro Lens with Partial Framer - $30 ea

Sold or Withdrawn

2x Ikelite #9580 Remote Slave Mount - $11 ea -withdrawn
1x Ikelite #9523.01 Tray & Release Handle Assembly for housings made by Olympus, Canon, Sony, etc. - $30 ea -sold
1x Ikelite #6111.17 Housing for Sony DSC-F717 - $499 ea -sold
2x Ikelite #9580.04 Ball Arm Extension - $14 ea -sold
2x Ikelite #9577.2 Ball Clamp - $19 ea -sold
1x Ikelite #4200 Digital Flash Meter - $149 ea -sold
1x Ikelite #4044 DS-50 SubStrobe - $150 ea -sold
1x Ikelite #4100.6 Manual Controller - $64 ea -sold
2x Hoya 67mm +4 Diopter Filter for F717 Housing -sold
1x Sea & Sea Motor Marine 16mm Wide Angle Conversion Lens - $129 ea -sold
1x Sea & Sea #58120 Conversion Lens Adapter for Sony MPK-P5 - $30 ea -sold
1x Sony MPK-P5 Housing for DSC-P5 Camera (without o-ring) - $40 ea -withdrawn
1x Ikelite #9577.33 Extended Handle Mount - $14 ea -sold
1x Ikelite #4100.6 Manual Controller - $64 ea -sold
2x Ikelite #9577.2 Ball Clamp - $19 ea -sold
1x Ikelite #9577.41 Substrobe 50, DS50, DS125 Mount - $14 ea -sold
1x Ikelite #9580.06 Ball Arm Extension - $16 ea -sold
1x Ikelite #9577.23 Ball Clamp with Mounting Stud - $23 ea -sold

Notes

All Ikelite strobe arm components are 1.25".

The Sea&Sea Motor Marine 3T Macro Lens framer uses two vertical bars that screw into the framer's base (to define the left and right FOV sides). The threads on the vertical bars are stripped. You can still use the framer's base and visualize the vertical limites fairly easily, but I've discounted the macro lens quite a bit since it isn't in perfect condition.

The clear plastic surface on the Mini-Cs, directly in-front of the light, shows minor crackling. This is the result of some use and is to be expected. The Mini-Cs include a loop of bungee that can be used to secure some diffusion material. I have extra, so I can throw in a square of diffusion material with the flashlights. I also have plenty of brand new spare o-rings I can part with for 50% off.

The DS-50 substrobe has a layer of silicon sealed cork glued to it. It works great to offset some of the strobe-arm weight. The battery compartment (4 x AA) has some discoloration on it's bottom. It's purely cosmetic and the flash works as new. I've dropped the price a little to compensate. The reason for the discoloration is that I put the flash underwater without closing the battery compartment properly (Doh!). The battery compartment is completely sealed, so after changing the batteries and a little cleaning, it was back to normal. -sold

There are small signs of use on the Sea&Sea 16mm Wide Conversion Lens - specifically 3-4 minor scratches on and near the yellow f-stop label. One of the plastic caps also has a bungie loop threaded through it. This was used to keep the lens cap secured when attached to a lens caddy. -sold